General Information
...
Analog outputs are then connected to the T7:
U - channel 1 - AIN0
V - channel 2 - AIN1
W - channel 3 - AIN2
sonic speed - channel 4 - AIN3
Sample Dataset taken over 10 min:
And zoomed in to ~half a second of data taking:
...
Relevant pin connections (all of which are copied from the manual)
Output pins from the anemometer (p. 15 of manual):
To change the analog output settings, connect a RS 432 serial port to a windows computer and to the anemometer outputs.
RS 432 serial port pin connections (p.32 of manual):
For the serial connector we were using, pin 2 was white, pin 3 was yellow, pin 5 was orange, but apparently this isn't necessarily generically true.
The windows computer should have WIND software downloaded on it. Follow p. 46 of the manual.
Mounting plate
