Page Comparison

Manual: WindMaster

Analog outputs are connected to the T7, reading out what we expect:
U - channel 1 - AIN0
V - channel 2 - AIN1
W - channel 3 - AIN2
sonic speed - channel 4 - AIN3

Output is 0-5 V

for sonic temperature, that corresponds to:

Image Added

for u, v, w, setting is at 5 m/s, since we're indoors, so the scaling is linear from -5 to + 5 m/s.

Relevant output pins from the anemometer (p. 15 of manual):

Image Modified

To change the analog outputs, connect a RS 432 serial port to a windows computer and to the anemometer outputs.

Image Modified

For the serial port we were using, pin 2 was white, pin 3 was yellow, pin 5 was orange