Thorlabs
| BE20-532 | 20X UVFS High-Power Beam Expander, V-Coated for 532 nm | 2 | $2,145.72 | Ordered (No.WEB N23W627866) 1/26 | View file |
|---|
| name | Confirmation_TS3478400_259924.PDF |
|---|
| height | 250 |
|---|
|
| Everything arrived as of 1/29 except: 1 x BE20-532 3 x PIA13 |
| SM2RC | Slip Ring for SM2 Lens Tubes, 8-32 Tap | 2 | $68.70 |
| SM2A30 | Adapter with External SM2 Threads and Internal M43 x 0.5 Threads | 2 | $35.64 |
| SM2RC/M | Slip Ring for SM2 Lens Tubes, M4 Tap | 2 | $68.70 |
| BS031 | 50:50 Non-Polarizing Beamsplitter Cube, 400 - 700 nm, 2" | 10 | $5,529.70 |
| PIA13 | Piezo Inertia Actuator, 13 mm Travel, Ø3/8" Mounting Barrel | 8 | $4,692.16 |
| PY004 | High-Load Pitch and Yaw Platform, 1/4"-20 Taps | 1 | $1,088.91 |
| KIM101 | Four-Channel K-Cube Piezo Inertia Motor Controller (Power Supply Sold Separately) | 2 | $2,342.86 |
| KPS201 | 15 V, 2.66 A Power Supply Unit with 3.5 mm Jack Connector for One K- or T-Cube | 2 | $78.24 |
| ADAPTER8 | KPS201:ADAPTER8 US : No Cost Accessory | 2 | $0.00 |
| Amazon | Lenovo IdeaPad |
| 1 |
| Ordered | Arrived |
Newport
| 8742-12-KIT | Picomotor Controller Kit, Twelve-Axis | 1 | $3,934 |
Not ordered - will not work (not enough force in piezos)
|
|
37 | Tip/Tilt and Rotation Platform, SM-13 Micrometers, 1/4-20 Thread | 6 | $5,634 |
8745-PS | Power Supply, 8742 and 8743-CL Controller/Driver, 12V | 1 | $112 |
8301NF | Picomotor Piezo Linear Actuator, 0.5in. Travel, 30 nm Resolution, 9.5 mm Shank | 12 | $8,556 |
Thorlabs
| BB2-E02 | Ø2" Broadband Dielectric Mirror, 400 - 750 nm | 4 | $644.32 | Ordered 1/28 (by Helen) |
Arrived |
| FMP2 | Fixed Ø2" Mirror Mount, 8-32 Tap | 3 | $72.27 |
| BSW27 | Ø2" 50:50 UVFS Plate Beamsplitter, Coating: 350 - 1100 nm, t = 8.0 mm | 2 | $747.38 |
| Motorized Filter Flip Mount with Ø2" Optic Holder, 8-32 Tap | 2 | $1,515.72 |
| Kiralux 12.3 MP CMOS Low-Profile Scientific Cameras | 2 | $4,598.16 |
| Motorized Filter Flip Mount with Ø1" Optic Holder, 8-32 Tap | 2 | $1,515.72 |
| Amazon | | Ø2" Beam Blockers | 10 | -- |
| Arrived |
| Thorlabs | | Pitch and Yaw Tilt Platform with Micrometer Drives | 8 | $2,461.36 | Ordered 1/30 (by Helen)
| Arrived
|
| Edmund | | 15mm Laser Mount | 1 |
|
| Arrived
|
| 1 mW 520nm laser module | 1 |
|
| Thorlabs | | 5X UVFS High-Power Beam Expander, V-Coated for 532 nm | 1 | $879.06 | Ordered 2/5 (by Helen)
| Arrived
|
| Adapter with External SM2 Threads and Internal M43 x 0.5 Threads | 1 | $18.18 |
| SM2 (2.035"-40) Coupler, Internal Threads | 1 | $21.86 |
| Adapter with External SM2 Threads and Internal SM1 Threads | 1 | $29.10 |
| SM1-Threaded Adapter for Ø11 mm, ≥0.35" (8.9 mm) Long Cylindrical Components | 2 | $67.70 |
| SM1 Lens Tube, 0.30" Thread Depth, One Retaining Ring Included | 2 | $26.30 |
| SM1 Lens Tube, 0.50" Thread Depth, One Retaining Ring Included | 2 | $27.24 |
| SM1 Lens Tube, 1.00" Thread Depth, One Retaining Ring Included | 2 | $30.82 |
| SM1 Lens Tube, 3.00" Thread Depth, One Retaining Ring Included | 2 | $58.46 |
| SM1-Threaded Adapter for Ø12 mm, ≥0.35" (8.9 mm) Long Cylindrical Components | 2 | $70.10 |
| Externally SM1-Threaded End Cap for Machining | 4 | $84.00 |
| SM1-Threaded Adapter for Ø9.5 mm, ≥0.18" (4.6 mm) Long Cylindrical Components | 2 | $64.74 |
| SM1 Lens Tube Without External Threads, 1/2" Long, Two Retaining Rings Included | 2 | $30.72 |
| SM1 Lens Tube Without External Threads, 1" Long, Two Retaining Rings Included | 2 | $33.92 |
| SM1 Lens Tube Without External Threads, 2" Long, Two Retaining Rings Included | 2 | $39.68 |
| SM1 Lens Tube, 4.00" Thread Depth, One Retaining Ring Included | 2 | $58$99.4628 |
| SM1-Threaded Adapter for Ø1/2" (Ø12.7 mm), ≥0.35" (8.9 mm) Long Cylindrical Components | 2 | $70.10 |
| Externally SM1-Threaded End Cap for MachiningAdapter for Ø10 mm, ≥0.35" (8.9 mm) Long Cylindrical Components | 4 | $84$135.0040 |
| SM1 -Threaded Adapter for Ø9.5 mm, ≥0.18" (4.6 mm) Long Cylindrical Components | 2 | $64.74 | SM1M05Lens Tube, 1.50" Thread Depth, One Retaining Ring Included | 2 | $33.96 |
| SM1 Lens Tube Without External Threads, 1/2.5" Long, Two Retaining Rings Included | 2 | $30$39.7268 |
| SM1 Lens Tube Without External Threads, 12.5" Long, Two Retaining Rings Included | 2 | $33$42.9266 |
| SM1 Lens Tube Without External Threads, 23.5" Long, Two Retaining Rings Included | 2 | $39$68.6860 |
| SM1 Lens Tube, 4.00" Thread Depth, One Retaining Ring Included-Threaded Adapter for Ø9 mm, ≥0.35" (8.9 mm) Long Cylindrical Components | 2 | $99$62.2890 |
| SM1-Threaded Adapter for Ø1/2Ø15 mm, ≥0.18" (Ø124.7 mm), ≥0.35" (8.9 mm) Long Cylindrical Components | 2 | $70.10 |
| SM1-Threaded Adapter for Ø10 mm, ≥0.35" (8.9 mm) Long Cylindrical Components | 4 | $135.40 |
| SM1 Lens Tube, 1.50" Thread Depth, One Retaining Ring Included | 2 | $33.96 |
| SM1 Lens Tube Without External Threads, 1.5" Long, Two Retaining Rings Included | 2 | $39.68 |
| SM1 Lens Tube Without External Threads, 2.5" Long, Two Retaining Rings Included | 2 | $42.66 |
| SM1 Lens Tube Without External Threads, 3.5" Long, Two Retaining Rings Included | 2 | $68.60 |
| SM1-Threaded Adapter for Ø9 mm, ≥0.35" (8.9 mm) Long Cylindrical Components | 2 | $62.90 |
| SM1-Threaded Adapter for Ø15 mm, ≥0.18" (4.6 mm) Long Cylindrical Components | 2 | $68.60 |
Quarton | | Laser Diode 523nm 0.39mW 6V 60mA Cylinder (10.0mm Dia) | 1 | Here | | McMaster Carr | | | 2 | $26.64 | Ordered 2.15 (Helen) | Arrived |
Thorlabs
| TIR Retroreflector, SM2-Threaded Mount, Uncoated | 3 | $869.55 | Arrived
| Ø25.0 mm Post Spacer, Thickness = 5 mm | 5 | $44.85 |
| Ø25.0 mm Post Spacer, Thickness = 1 mm | 8 | $61.28 |
| Ø25.0 mm Post Spacer, Thickness = 10 mm | 5 | $50.25 |
| Ø1/2" Post Spacer, 10 mm Thick, Qty. 5 | 1 | $26.18 |
| Ø1/2" Post Spacer, 1 mm Thick, Qty. 5 | 1 | $19.97 |
| Anti-Rotation Alignment Key for TR Series Posts | 15 | $113.10 |
McMaster-Carr | | Alloy Steel Low-Profile Socket Head Screw, Hex Drive, Black Oxide, 1/4"-20 Thread Size, 7/8" Long | 1 (Qty 10) | $9.95 | Arrived | Vance Manufacturing | | Vance 5 Degree Outboard Transom Wedges - Reversible - Machined Billet Wedges | 2 | $376.50 | Arrived | 5 Degree Wedge Washer Set - Finish: Hard Black Anodized | 2 | $0.00 |
| Vance 10 Degree Outboard Transom Wedges - Reversible - Machined Billet Wedges | 1 | $256.45 |
| 10 Degree Wedge Washer Set - Finish: Hard Black Anodized | 1 | $0.00 |
| Thorlabs | | 50 mm (1.97") Motorized Translation Stage Bundled with Controller and Power Supply, M4 and M3 Taps | 1 | $1856.26 | Arrived6 mm) Long Cylindrical Components | 2 | $68.60 |
| Quarton | | Laser Diode 523nm 0.39mW 6V 60mA Cylinder (10.0mm Dia) | 1 |
|
| Here |
| McMaster Carr | | | 2 | $26.64 | Ordered 2.15 (Helen) | Arrived |
Thorlabs | | TIR Retroreflector, SM2-Threaded Mount, Uncoated | 3 | $869.55 |
|
Arrived
|
| Ø25.0 mm Post Spacer, Thickness = 5 mm | 5 | $44.85 |
| Ø25.0 mm Post Spacer, Thickness = 1 mm | 8 | $61.28 |
| Ø25.0 mm Post Spacer, Thickness = 10 mm | 5 | $50.25 |
| Ø1/2" Post Spacer, 10 mm Thick, Qty. 5 | 1 | $26.18 |
| Ø1/2" Post Spacer, 1 mm Thick, Qty. 5 | 1 | $19.97 |
| Anti-Rotation Alignment Key for TR Series Posts | 15 | $113.10 |
| McMaster-Carr | | Alloy Steel Low-Profile Socket Head Screw, Hex Drive, Black Oxide, 1/4"-20 Thread Size, 7/8" Long | 1 (Qty 10) | $9.95 |
| Arrived |
| Vance Manufacturing | | Vance 5 Degree Outboard Transom Wedges - Reversible - Machined Billet Wedges | 2 | $376.50 |
|
Arrived |
| 5 Degree Wedge Washer Set - Finish: Hard Black Anodized | 2 | $0.00 |
| Vance 10 Degree Outboard Transom Wedges - Reversible - Machined Billet Wedges | 1 | $256.45 |
| 10 Degree Wedge Washer Set - Finish: Hard Black Anodized | 1 | $0.00 |
| Thorlabs | | 50 mm (1.97") Motorized Translation Stage Bundled with Controller and Power Supply, M4 and M3 Taps | 2 |
|
| Arrived
|
| Large Right-Angle Bracket, 1/4"-20 Holes | 2 |
|
| Aluminum Breadboard 6" x 48" x 1/2", 1/4"-20 Taps | 2 |
|
| ADAPTER6-US |
| 2 |
|
| Base Plate for MTS50 Series Translation Stages | 2 |
|
|
| 2 |
|
ESK25* in back room, communal |
| 1 |
|
|
| 2 |
|
|
| 4 |
|
|
| 1 |
|
|
| 1 |
|
|
| 1 |
|
|
| 1 |
|
|
| 1 |
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|