...
- FMP2 mounts with BB2-E02 mirrors in them are extremely difficult to get on to the tip-tilt stages. Note which equipment needed for that.
- During assembly, I should write down which serial numbers of piezos/channels correspond to which serial numbers on the k-cubes.
- test collimation when assembling
- mounting just to the right of the slit
- add the ar90L to packing list
...
- Laser diode
- Modified AD10F
- BE05-532
- BE20-532
- (2) KM100 mounts
- BSW27 plate beamsplitter
- (2) MFF102 flip mount (+ power supply, USB)
- ND Filter Kit
- PFE10-G01 elliptical mirror
- H45E1 45 degree mount
- CM750-500-G01 large concave mirror, f=500mm
- LP126MU camera
- (5) BS031 beamsplitter cubes
- (5) Sets of machined beamsplitter cube holders (+screws)
- (5) APY002 stages (with piezo actuators)
- (2) KIM100 piezo controllers (+ power supplies)
- LabJack T7 Pro
- Geekom iT13 Pro (+ power supply)
- (3) BB2-E02 mirrors
- Translation stage (+ power supply, motor controller)
- 1/4-20" mounting hardware
- Mac ethernet adapter (for testing connectivity issues)
- Ethernet cables
- Ethernet switch
- Zip ties
- Power strip
Tools
- Imperial wrench set
- Metric wrench set
- LabJack screwdriver
- SPW602, SPW604
- Wire cutters / strippers / additional wire
- Laser pointer
- Optical cards
- Alignment ruler
- Laser level
...