...
| Table of Contents | ||
|---|---|---|
|
Instructions for Computer Remote-In (under construction pending Hernán hardware installation - ticket IT-5200)
- Download Microsoft Remote Desktop or Royal TSX (mac developer software)
- Remote desktop: go to the + dropdown and press "Add PC"
- Royal TSX: go to add → remote desktop
- In computer name, paste the IP address: 139.229.170.101
- Input Login Credentials
- Remote desktop: In user account, you will want to put in the below login
- Royal TSX: add a credential with the below login
- username: moss-ladmin
- password: MO2024rubin
- You MUST be on summit VPN or summit wifi to access
- It's possible if someone else is logged in, the system will take 30s to kick them off if they don't respond to an onscreen prompt.
Eventually will use the FQDN (unique identifier): auxtel-moss01.cp.lsst.org
General Operations
All information about piezo and flip mount status is in ThorLabs Kinesis app. Search for it in Windows start menu.
...
Use command-line parameters as shown in observing log above, with format " python pulses.py -n num_pulses -d duty_cycle -f frequency".
Piezo Control
Odd Piezos on Kinesis are movement in azimuth; even are movement in elevation, as shown in image below on non-piezo stage.
...
| Motor Controller | Tip/Tilt Stage Number (as in image above) | Ports |
|---|---|---|
KIM101 Top S/N 97102990 | 1 | 1 (azimuth) |
| 2 (elevation) | ||
| 2 | 3 (azimuth) | |
| 4 (elevation) | ||
KIM101 Bottom S/N 97103144 | 3 | 1 (azimuth) |
| 2 (elevation) | ||
| 4 | 3 (azimuth) | |
| 4 (elevation) |
Flip Mount Control
Position 2 is with ND filters out of beam. Position 1 has them in the beam.
...