...
Step-by-step for connection setup
Connect a USB -IN Type B on the back of the electrometer to the laptop
The USB -IN cable is connected to a huble USB hub that goes into the USB-C power entry of the laptop. This step is needed because the laptop does not accept a high-voltage entry through USB.
Turn on the keysight electrometer (see apparatus manual for instructions)
After that, the electrometer should pop-up as an external driver (hard disk)
Make sure you have install keysight commander
With keysight commander discover what is the name of the instrument USB
Run the python script keysight_usb_connection.py
...