Content Comparison

...

1. run ATpneumatics_checkout
2. open dome: auxtel/atdome/open_dome.py
3. open mirror covers (component: ATPneumatics, cmd: openM1Cover)
4. enable corrections:
   1. 
5. With run command, disable dome following.
   1. 
6. run correct pointing (put range for target there)
7. try to run latiss_wep_align to focus telescope - may not work, may have to do manual focus sweep
8. NOTE: FIND CORRECT AZ POINTING FOR THE DOME
9. Find targets of mag 12 +/- 1 at a large range of airmasses/elevations and take images of those without moving dome
   1. 
   2. take_image_latiss as engtest → with g band in filter wheel, reason is on-sky, probably
10. stop tracking
    1. 
11. point to MOSS and take a series of images there
    1. 
    2. take_image_latiss

...

Why does it seem like we are still plotting the dataframe with data that does not necessarily have all four sources? Are we plotting over points here?

Split the plot into plotting by the source pair (0-5); it seems that

a) sources are not being paired consistently, so we have a few groups that are split 1/2 and 1/2 

b) the smaller two groups are actually from the same pair of beams, and the distance between them in y is changing dramatically

Image Added

Now, we want to find which pair of beams!