Note, see Rubin trip Nov 2022, Stubbs for log for day 1, Dec. 2, 2022.
Dec. 5, 2022
SHWFS
After recharging the battery, the camera now connects fine and can be remotely controlled by the Mac mini. Screensharing on the Mac mini still works. I think we're basically ready to take this on-sky again.
Anemometer
Power supply arrived. The new connections are more secure and the labjack is immobilized in a box. Also, Wouter will try to put this into the CSC in January. But for now we are taking data with the Mac mini.
Example 1 minute of anemometer test data (where I fanned it in the middle). Data is in anemometer_test.db
Now I've started a scan that should last for the duration of the observing run (of course, we can stop and move the anemometer if we want - right now the anemometer is on the table at the edge of the dome, as it was in May). It's called anemometer_2022_DecA.db. Here's an initial look:
Note - the dome is closed right now.
Differential temperature sensor
Also started a run that should last until Friday afternoon, and thus cover the whole observing period. (I will of course check periodically to make sure it's still saving the data.)
Dec. 6
Got a DHCP reservation for the new Mac that will run the DIMSUM:
auxtel-macmini03.cp.lsst.org
139.229.164.205
It can now connect to the RubinObs-LHN wifi and it's possible to ssh into the computer.
Also installed globus endpoints on the meerkat and the anemometer Mac mini. Just need to tar the data and then it can be transferred to the RC storage.
Details of the installation of DIMSUM are detailed in Ali's logbook.
Dec. 7
Recovery from internet connection loss
Power was lost on the summit the night of the 6th. It was fixed the morning of the 7th. After it was fixed I still did not have an ssh connection to the anemometer Mac mini and the meerkat temperature probe. I connected a screen + mouse + keyboard to both computers. For the meerkat, I just had to connect and log back in. I did not have to restart the computer. I can ssh into it and it has continuously taken data throughout the whole period. For the Mac mini, it was frozen and I had to restart it. Data taking stopped (when I restarted the computer - it was taking data locally while the wifi was off) and I restarted it, with the new filename anemometer_2022_DecA_2.db. The original anemometer_2022_DecA file was corrupted by the restart, but could be fixed with the command: 'sqlite3 old_file.db .recover | sqlite3 new_file.db'. This dumped the data in the corrupted file into a new file. I then renamed the new file to anemometer_2022_DecA.db
Summit internet access
Also, got Ali access to the summit guest wifi. Specifically, we had to fill out the onboarding form (from Diego):
This is the Summit Onboarding Procedure. Here you will find instructions to access various services in Rubin, including WIFI: https://ittn-045.lsst.io/
The onboarding form can be found here: https://project.lsst.org/visiting-the-summit/network-access
Dec. 8
Took fall training and lockout/tagout training in the morning.
Anemometer and Differential temperature sensor have been taking data pretty typically. Dome was cracked and closed throughout the day depending on the need of the two instruments being installed there.
See Ali's page for updates on the DIMSUM installation.