| Thorlabs | BE20-532 | 20X UVFS High-Power Beam Expander, V-Coated for 532 nm | 2 | $2,145.72 | Ordered (No. WEB N23W627866) 1/26 | Everything arrived as of 1/29 except: 1 x BE20-532 3 x PIA13 |
| Thorlabs | SM2RC | Slip Ring for SM2 Lens Tubes, 8-32 Tap | 2 | $68.70 | ||
| Thorlabs | SM2A30 | Adapter with External SM2 Threads and Internal M43 x 0.5 Threads | 2 | $35.64 | ||
| Thorlabs | SM2RC/M | Slip Ring for SM2 Lens Tubes, M4 Tap | 2 | $68.70 | ||
| Thorlabs | BS031 | 50:50 Non-Polarizing Beamsplitter Cube, 400 - 700 nm, 2" | 10 | $5,529.70 | ||
| Thorlabs | PIA13 | Piezo Inertia Actuator, 13 mm Travel, Ø3/8" Mounting Barrel | 8 | $4,692.16 | ||
| Thorlabs | PY004 | High-Load Pitch and Yaw Platform, 1/4"-20 Taps | 1 | $1,088.91 | ||
| Thorlabs | KIM101 | Four-Channel K-Cube Piezo Inertia Motor Controller (Power Supply Sold Separately) | 2 | $2,342.86 | ||
| Thorlabs | KPS201 | 15 V, 2.66 A Power Supply Unit with 3.5 mm Jack Connector for One K- or T-Cube | 2 | $78.24 | ||
| Thorlabs | ADAPTER8 | KPS201:ADAPTER8 US : No Cost Accessory | 2 | $0.00 | ||
| Amazon | Lenovo IdeaPad | 1 | Ordered | Arrived | ||
Not ordered - will not work (not enough force in piezos) | ||||||
| Thorlabs | BB2-E02 | Ø2" Broadband Dielectric Mirror, 400 - 750 nm | 4 | $644.32 | Ordered 1/28 (by Helen) | Arrived |
| Thorlabs | FMP2 | Fixed Ø2" Mirror Mount, 8-32 Tap | 3 | $72.27 | ||
| Thorlabs | BSW27 | Ø2" 50:50 UVFS Plate Beamsplitter, Coating: 350 - 1100 nm, t = 8.0 mm | 2 | $747.38 | ||
| Thorlabs | Motorized Filter Flip Mount with Ø2" Optic Holder, 8-32 Tap | 2 | $1,515.72 | |||
| Thorlabs | Kiralux 12.3 MP CMOS Low-Profile Scientific Cameras | 2 | $4,598.16 | |||
| Thorlabs | Motorized Filter Flip Mount with Ø1" Optic Holder, 8-32 Tap | 2 | $1,515.72 | |||
| Amazon | Beam Blockers (diameter?) | 10 | -- | Arrived | ||
| Thorlabs | Pitch and Yaw Tilt Platform with Micrometer Drives | 8 | $2,461.36 | Ordered 1/30 (by Helen) | Arrived? Kane ordered exact same thing for his project so am unsure... |
General
Content
Integrations