...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
INTRODUCTION
Output from the Description field displays to users in HOLLIS, as well as to staff in Alma.
...
The data (numeric, alphabetic, and/or symbolic) is formatted according to ANSI/NISO Holdings Statements for Bibliographic Items.
The standards for recording enumeration and chronology in the bibliographic record are different from standards associated with holdings and items. .
GUIDING PRINCIPLES
The following best practices should be applied to prospectively created data.
However, in cases when item records are already attached to a holdings record, and staff members are merely creating items for additional parts, formatting data in the new items so it remains consistent with existing data is recommended. Avoid reformatting existing data to match current best practices unless there is a compelling reason to do so that affects access.
GENERAL GUIDELINES
Hierarchical order of data
The order of this data is hierarchical: from the largest entity to the smallest.
...
(For more information, see below under: Levels of chronology.)
Span of multiple parts
When recording a span of parts for which the data involves both enumeration and chronology, give in the form of: enumeration-enumeration (chronology-chronology).
v.1-3 (1900-1902)[not v.1 (1900)-v.3 (1902)]
Spacing within data
When creating item descriptions manually, one space should be inserted between enumeration and chronology or after a comma, as necessary to enhance readability. For other elements, data is run together without spaces (unless there is no punctuation, in which case a space should be used, e.g., Heft 12). (Please note that items created by prediction will not have these spaces; there is no need to bring items into alignment in this regard.) When both enumeration and chronology are present, the chronology follows the enumeration and the chronology is enclosed in parentheses.
...
Item created by prediction:
v.3:pt.2(1976:Jan.)
Language of captions and chronological designations
The recommended best practice is to record captions and chronological designations in the language in which they appear on the resource being described. For resources with multiple languages, the predominant language should be preferred. This prevents users from needing to translate between data from citations and data in HOLLIS.
...
English has been used routinely for certain languages in much legacy data.
Capitalization
Follow capitalization rules of the language used, e.g. capitalize German nouns and months in English, Greek, Indonesian, Latin, Malaysian, Romanian, and Welsh.
...
Band 3 becomes Bd.3
reel 32 remains reel 32
Supplied information
If information pertaining to the resource needs to be supplied or clarified, square brackets may be used for this information in the Description field only. For instance, if a bibliographic item normally carries chronology data and such data is omitted from some pieces, or if clarification is needed (e.g., to establish Gregorian dates):
[1984]
[spring]
5779 [2019]
Gaps
The Description field can also be used to indicate gaps in the item. (For detailed best practices, see below.)
SEQUENTIAL DESIGNATORS
Arabic numbers
Convert all numeric information to Arabic numbers.
VII becomes 7
six becomes 6
Ordinal numbers
If ordinal numbers are recorded, use the form:
...
troisième becomes 3. or 3e
3. Teil becomes 3.T.
Alphabetic characters
Record uppercase and lowercase alphabetic characters as they appear on the bibliographic item.
...
Optionally, romanize nonroman alphabetic data.
Combined numbering
When a bibliographic item is issued with combined numbering—not when bound together locally after receipt—separate the numbers by a forward slash.
...
Jahrg.71:Folge 12/Jahrg.72:Folge 1
Bracketed numbering
When a part of an otherwise numbered unit lacks numeric or alphabetic designation, it may be supplied in square brackets.
[v.1]-3 [Enumeration supplied for v.1.]
CAPTIONS
Order of captions with sequential designations
Record the enumeration for serial and multipart units by giving the caption, followed by the sequential designations of the pieces held.
...
third series becomes ser.3
Caption abbreviations
In cases where captions exist on the piece/in the holdings record, abbreviated captions are to be used for all linked items created.
...
A list of supplementary terms exists here: https://wiki.harvard.edu/confluence/display/LibraryBestPractice/Holdings+records?showComments=true&preview=/209191910/209197294/caption_abbreviations_supplementing_AACR2%20copy.pdf).
No captions
In cases where no captions exist on the piece/in the holdings record, no captions will be used on item records.
1 (1990)
2 (1991)
LEVELS OF ENUMERATION
Use of colons to separate hierarchical levels of enumeration
When enumeration below the first level is given, use a colon to separate each level of enumeration.
v.1:no.1
Bd.1:T.1:Nr.3
1:2:1
First-level series designators
For both numbered and unnumbered first-level series designators, record the series level as the first level of enumeration. When the first level is a series, always record the second-level enumeration along with the first level. As usual, separate the first level from the second with a colon.
...
Note: Holdings statements created according to this standard, Z39.71-2006, are to use the abbreviation “new ser.” followed by a colon. Holdings statements created according to Z39.42-1980 or Z39.44-1986 may use the obsolete abbreviation “n.s.” without a colon.
Caveat when compressing holdings statements
Don’t compress half of the statement. If it is necessary to record both first-level and subsequent level enumeration in the holdings statement, repeat all levels of enumeration at the beginning and end of each range held.
...
(Please note that compressed statements that similarly combine incomplete volumes are not allowed in 85X/86X pairs in holdings records. For more information, see Example 33 in the Holdings Examples: https://wiki.harvard.edu/confluence/x/ICeVDQ.)
LEVELS OF CHRONOLOGY
Maintaining correspondence between levels of enumeration/chronology
Chronology data below the first level should be recorded when a corresponding level of enumeration is recorded.
...
no. 1-61 (1971:Jan.1-Mar.1)
Use colons to separate hierarchical levels of chronology
When chronology below the first level is recorded, use a colon to separate the year from the month.
...
1988:Feb.1 [not 1988:Feb.:1]
DATES
Order of preference between type of dates
When more than one type of date is present on the bibliographic item, select date from the following preferred dates, in this order:
...
Do not use the date of reprinting because the chronology information should be that which is associated with the original work. Reprint information is properly a part of the bibliographic description of the work.
Recording years
Use Arabic numerals.
Record all four digits of the year.
...
For dates in other calendars, record the given date in Arabic numerals, followed by the Gregorian date in square brackets.
5779 [2019]
Abbreviation of months
Abbreviate months using standard abbreviations found here: Month abbreviations in various languages
1989:Jan.
1987:juil.
1993:mid-Sept.
Recording seasons
Although seasons are recorded in Enumeration and Chronology fields as numeric values, in Description fields seasons are recorded in spelled out form:
spring
INDICATING GAPS
When recording gaps in Description field:
If 4 gaps or fewer, record detailed holdings statement, using commas to show gaps
...
590-608 (1996-2002) incomplete
ALTERNATIVE NUMBERING
When creating item records for a new serial that has a main numbering system and an alternative numbering system, record only the main numbering system.
...
In cases when an alternative numbering system gets introduced and is presented more prominently than the previously existing main numbering system, it is acceptable to continue using the first system in the Description field.
SPECIAL SITUATIONS
Changes in designation
When the designation has changed, resulting in a mixed statement of enumeration and chronology, record such mixed statements as they occur, separated by a SEMICOLON.
...
v.1-10 (1900-1910);new ser.:v.1-3 (1911-1913)
Supplied/inferred volume numbering for earliest parts
In some cases, volume numbering begins not long after the first issue of a serial or first part of a multipart monograph. When a note in a bibliographic record shows that the volume numbering of the earliest parts is being supplied as inferred by the cataloger, use brackets in the item description for the inferred number:
...
Item record Description field: [v.1]-6 (1899/1900-1905/1906)
Numbering mistakes
Notes about misnumbered parts can be recorded in holdings records (see Holdings Examples, example 36, Error in numbering). Errors in numbering can optionally also be described in the Description field. When a part is clearly misnumbered, optionally record the incorrect number followed by the correct number given in brackets after “i.e.”:
...
Do not assume misnumbering unless you have the previous and following parts to compare to.
ADDITIONAL DESCRIPTIONS - SUPPLEMENTS
Use the Description field to indicate the presence of supplements or to indicate when the entire item consists of a supplement:
...
Stand-alone supplement to volume(s)
v.5:suppl.
ADDITIONAL DESCRIPTIONS - FORMATS AND SPECIAL ISSUES
The Description field can also contain data to identify a work or a section of a work identified by a non-numeric designator, or to describe additional physical contents of the item (such as when volumes are specific to format or content, e.g. text; plates/illustrations; answers; media, maps; posters):
...
v.5 (1990) + special issues
ADDITIONAL DESCRIPTION - INDEXES
Use the plus sign to record information about indexes that were originally physically separate, but are now bound or housed with other parts. The indexes may cover all of the item, some of the item, or more than the item:
...