2.2 Smartphone Application
Parameters (Slider, toggle, etc): Parameters can be synchronized, You can control them from the Fologram. Layers: Layers from Rhino3D can be found from here you can turn on or off the visibility. Layer with star mark(*) is the selected layer from Rhino3D. Models: You can find example models from here Edit: You can define new base coordinate and visualize plane of different axis. | |||
Parameters |
Layers |
Models |
Edit |
Setting: There are a lot of settings; activating some features requiring complicated calculation, and visibility. | |
|
|
2.3 Grasshopper Components
Figure 1 Fologram Components
Most of the functions of Fologram are at Grasshopper. So, a bit of understanding of using grasshopper is required. Some of the components are described from the Fologram community website.
Component Description -> https://community.fologram.com/t/introducing-new-components-in-fologram-2020-1-release/62
But only specific components are needed when you use smartphone. So, in this chapter, I describe the basic component that you will mostly use. Moreover, you can ignore the brown colored components. The essential components for interacting with smartphone are purple ones.