Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 11 Next »

Scanning Key Content Guidelines,Workflow, and Supporting Documents

Houghton Library, following the successful Library Lab pilot project, continues to scan title pages, content lists, bindings, or other parts of printed material at the point of cataloging when they encounter something visually striking, or useful to the patron.  These reference scans are linked to the Hollis record to enhance access to the materials.

Scanning Guidelines

General Guidelines:

  • Capture items at a resolution of at least 300dpi in a tif file format

  • Items with no copyright concerns should be saved in one folder named "No copyright concerns" (either on the computer or on a flash drive), which will be deposited by Imaging Services at full resolution using one billing code

  • Items that are still in copyright or have an unclear copyright status should be saved in a separate folder named "Copyright concerns" (either on the computer or on a flash drive) and will be deposited by Imaging Services at a reduced resolution of 72dpi using a different billing code

  • Once 500 images (or fewer) are captured, the two folders are to be hand-delivered on a single flash drive to the Head of Technical Services, who will deliver it to Imaging Services

Naming:

Creation of file name should be constructed with SKC template codes using this general example- holdings no_sequence of images_template code   

 For example:

  • Book-   091256783_01_cov1.tif

  • Serial cover with year- 004951966_01_srl_1975.tif

  • Serial cover with year and month- 019378657_01_srl_1975_June.tif

  • Serial cover with year and month day-  019378657_03_srl_1975_June_10.tif

  • Serial cover with date volume and number- 01937657_04_srl_1975_x_x_1_1.tif

  • Serial cover with date and number- 019387780_01_srl_1975_x_x_x_1.tif

  • Serial cover with number- 019414556_01_srl_x_x_x_x_1.tif

For serials,do not put the words vol. or no. in the file name, the macro will do this later.  The x is a placeholder that in conjunction with a specific macro will create the appropriate columns in the spreadsheet when we link the images. File names cannot have periods, commas, or spaces.


 

NEW scanning Workflow (Post-Deposit) using only one macro

 

  • Make sure MacroExpress is running on your computer
  • Create an excel spreadsheet with the text data from the DRS report
    • Because of the new DRS2 we will need to sort the FILE-URN column (usually K) to eliminate the blanks (but don't worry everything is sequential so it show all stay in the same order)
      • Sort the FILE-URN column sort from A-Z, expanding the selection
      • Then scroll down to row 500 (or to however many images you included in the batch) and delete all data below that is irrelevant (it will probably be row 501 and the third column will show descriptor.xml, so you want to delete anything including that 501 row and below)
  • “Save as” the txt file as an .xls then open it (it will give you an error message but just click ok and it should still open with the data in columns)
  •  
  • Open a second sheet within your open .xls then find and copy these 3 columns from the drs excel report and place them in the following order:
    • FILE-ORIGPATH—usually “O” (to column A)
    • OBJ-OSN—usually “E” (to column B)
    • FILE-URN—usually “K” (to column C)
    • Then delete the top row (if you have retained it) in 2nd sheet (to get rid of the column labels)
  •  
  • Save the spreadsheet as an .xlsm (Excel Macro-Enabled Workbook)
  • Open the updated SKC-856_template_newer.xlsm in Excel (make sure name remains the same)
  • Copy the first three columns that are on second sheet you just created and paste them into the upper left most corner of the SKC-856 spreadsheet, under the column headers (Important: you must select the columns by cell, not as the entire column of the spreadsheet or the macro will fail)
  • Check for any suspicious holdings numbers that seem incorrect
  • Run the internal macro that is set up in Excel and now embedded in the SKC-856 spreadsheet template newer by activating with <CTRL><Q>
  •  
  • Drag down the appropriate columns (K, L, M) to populate the rows on the spreadsheet
  • Make sure that all values in K,L,M populated and are correct, particularly M, which should have a location, and a full URN.
  •  
  • You now need to create a CSV file with the holdings number (column B) and the 856 field (column M) only, cut and paste them from your spreadsheet into a FRESH (not control-N) new spreadsheet, then save (It will give you error pop-ups about formatting but just click yes you want to continue and save it as CSV (comma delimited))
  • Then use the SAVE AS command and save the file identified with SKC and batch number
    • example: skc_batch_5.xlsm
  •  
  • Open up Aleph and open to HVD60
  • Run macro <CTRL><m> from Aleph (this macro, found in the Santo Domingo documentation, will run the CSV without it being open in Excel which means that it isn't constantly navigating from Excel to Aleph, adding holdings following a similar logic from the older macro)
    • It will prompt you to navigate to the CSV that you created and saved earlier
    • Select the correct CSV file and then it will start working by inputting the holdings record and corresponding URN
  • Watch macro run to insure that proper URNs are being inserted
    • Stop macro if problems ensue, and be sure to delete all added 856s, using holdings numbers from excel spreadsheet
  • Once macro has run successfully, spot check records for data; change “misc” entries where desired for better vocabulary.

OLD scanning Workflow (Post-Deposit)

Once we receive the DRS report of our batch of images we need to transfer the information to a spreadsheet and run macros to add them to the correct holdings record When you get the DRS deposit report, take the following steps:

  1. Make sure Macro Express is running on your computer.
  2. Open the DRS report in Excel.
    1. You may need to enable or allow macros.
  3. Open the SKC-856 spreadsheet template in Excel (template file required to work with the macro)
  4. Locate the section of the DRS report that lists the JP2 files. You’ll know you have the right section because the URN column of the spreadsheet will contain data/URNs.
  5. Copy the first three columns of the DRS spreadsheet that include the Full File Name, the Owner-supplied Name, and the URN for the JP2 images.
  6. Paste the copied data into a blank spreadsheet, then run a find and replace to eliminate the x placeholders (Find x Replace will simply be blank) (*note because of the enabled macros on the SKC-856 spreadsheet you cannot do a find/replace function on it)
  7. After you have gotten rid of the x placeholders copy the first three columns and past them into the upper left most corner of the SKC-856 spreadsheet, under the column headers.
  8. Run the SKC.mex macro 
  9. Drag down the appropriate columns (K, L, M) to populate the rows on the spreadsheet
  10. Then use the SAVE AS command please save the file as SKC_adding_links.xlsx  (you must do this or the next macro WILL NOT work)

Adding the 856 Fields to Aleph:

  1. Connect to the holdings HVD60 in the Aleph cataloging module (it is recommended that only one editing pane be open (instead of split-editor) for when the record is pulled up to make the macro run more smoothly)
  2. Open up the SKC_adding_links.xlsx
  3. Activate the Expanded-856 macro which will:
    1. Copy the first holdings record number and 856 information
    2. Switch back to Aleph
    3. Go to the end of the record

    4. Type the tag, indicators, and $3

      Field
      Indicators
      Subfield
      85640$3 Cover
        $u http://nrs.harvard.edu/urn-3:FHCL:13613784
        $x keycontent



    5. Paste the link
      Note: If the next link is on the same holdings record it should continue to add links if the next one is a different record it will switch to the new holdings

Last step:

  1.  Once you have added all of the links you want to SAVE AS the SKC_adding_links.xlsx as a DIFFERENT and permanent file with the batch number, follow this convention:
    • Links_added_batch_[insert batch number]_drs[insert drs report number].
  2. Then erase all the data from the SKC_adding_links spreadsheet so we can use it for the next batch.

Templates and Macros

Links for current file versions on the HL-ITS SKC Project wiki

Altering the template of terms for creating file names

If you want to use a term that is not already available you will need to update both spreadsheets AND the macro (if you are using the original SKC macro you would use the DRSrept-856 and the location of the range will be on a different line)

Spreadsheets

1. Open up the SKC templates codes spreadsheet and add your additional term and save the file. Open up the SKC-856 spreadsheet template and add your additional term and save the file

Macro

  1. Open up the SKC macro and double click on the SKC Serials file
  2. Navigate to line 15 which should look like this  =LOOKUP($D1, Sheet2!$A$1:$A$33, Sheet2!$B$1:$B$33)<TAB>
  3. Change the range to include the extra terms that you added in both the A and B areas (e.g. $A$33 changes to $A$34)
  4. Save and close the macro

Occasionally, despite all precautions, some links will not make it through the batch loading process. If this happens, they can be loaded manually. To do so, add a 856 field and copy from the spreadsheet the expanded caption term and the DRS link (column M) using the following pattern:

856 40 $$3Title page$$uhttp://nrs.harvard.edu/urn-3:FHCL.HOUGH:24021813$$xkeycontent
856 40 $$3Cast list$$uhttp://nrs.harvard.edu/urn-3:FHCL.HOUGH:24021877$$xkeycontent


 

 

 

  • No labels

Copyright © 2024 The President and Fellows of Harvard College * Accessibility * Support * Request Access * Terms of Use