Overview
Git is a distributed version control system developed by Linus Torvalds as a replacement for BitKeeper, used for managing the Linux kernel source tree. For the following commands, please see the documentation at
and the links from there for each sub-command.
Getting Started
Getting help
Most commands have built-in documentation you can access with the --help option:
git init --help
Also available via man, e.g:
man git-init
Creating a repository
Use git init to create a git repository in your current directory:
git init
Here the documentation for this command.
git init creates a git repository (named .git) in your current working directory. You will add files to this repository using git add. This gives you a repository (the .git directory) and a working copy (everything else).
Tracking an Existing Repo
If you are going to start tracking an existing project with git, you will generally start like this:
$ git init
Initialized empty Git repository in .../.git/
$ git add . $ git commit -m 'initial import'
If you are creating a repository that people will be accessing remotely, you will normally want to create a "bare" repository, which consists of just the contents of the .git directory and no working copy. You do this with the -b flag:
$ git init -b
Adding files
The command git add schedules files to be committed to the repository.
git add PATH [PATH ...]
Unlike Subversion, if you modify a file you (generally) need to git add that file in order to make the changes part of the next commit.
Use the git reset command to "undo" an add operation:
git reset HEAD
This resets the index but leaves your working directory untouched. You can also use git reset to revert to a previous commit; read the documentation for more information.
Committing changes
Use git commit to commit files to your local repository:
git commit [-a] [PATH ...]
The command git commit by itself will commit any changes scheduled using git add. If you would like to commit all locally modified files, use the -a option:
git commit -a
You may also commit a subset of modified files by specifying paths on the
command line:
git commit path/to/modified/file
Managing Files
Renaming files
Use git mv to rename files in the repository:
git mv SRC DST
Because git tracks files by cryptographic checksum, rather than by name, the git mv command is not strictly necessary. If you manually rename a file and then do a git rm file followed by a git add file, git will correctly recognize that you have simply renamed it (because the checksum is still the same).
Removing files
Use git rm to remove files from the repository:
git rm PATH [...]
What's changed: status
Use git status to see a list of modified files:
git status
The output of git status will look something like this:
$ git status # On branch master # Changed but not updated: # (use "git add <file>..." to update what will be committed) # (use "git checkout -- <file>..." to discard changes in working directory) # # modified: version-control.rst # # Untracked files: # (use "git add <file>..." to include in what will be committed) # # examples/ no changes added to commit (use "git add" and/or "git commit -a")
The files listed as "changed but not updated" are files that you have modified but not yet added to the repository. "Untracked files" are files that have not previously been added to the repository.
What's changed: diffs
Use git diff to see pending changes in your working copy:
git diff
The output of git diff is standard diff output, e.g.:
$ git diff diff --git a/version-control.rst b/version-control.rst index e518192..b1c519a 100644 --- a/version-control.rst +++ b/version-control.rst @@ -243,6 +243,34 @@ commit`` to commit them to the (local) repository:: Using git: What's changed? ========================== +Use ``git status`` to see a list of modified files:: + + git status + +.. container:: handout + + The output will look something like this:: +
You can also use git diff to see the changes between arbitrary revisions of your project:
- Changes in working copy vs. previous commit:
git diff <commit>
-Changes between two previous commits:
git diff <commit1> <commit2>
Working With Remote Repos
Cloning a Remote Repository
Use the git clone command to check out a working copy of a remote repository:
git clone REPOSITORY [DIRECTORY]
The command git clone will clone the remote repository to a new directory in your current directory named after the repository, unless you explicitly provide a name with the DIRECTORY argument.
This is analogous to Subversion's checkout operation.
You can only clone the top-level repository; unlike Subversion, git does not allow you to clone individual subtrees.
Updating your working copy
Use git pull to update your local repository from the remote repository and merge changes into your working copy:
git pull [REPOSITORY [REFSPEC]]
git pull by itself will pull changes from the remote repository defined by the branch.master.remote config option (which will typically be the repository from which you originally cloned your working copy). If there are multiple remote repositories associated with your working copy, you can specify a repository (and branch) on the command line, e.g, to pull changes from the branch master at a remote named origin:
$ git pull origin master
Pushing changes
Use git push to send your committed changes to a remote repository:
git push [REPOSITORY [REFSPEC]]
git push by itself will push your changes to the remote repository defined by the branch.master.remote config option (which will typically be the repository from which you originally cloned your working copy). If there are multiple remote repositories associated with your working copy, you can specify a repository (and branch) on the command line, e.g, to push your changes to branch master at a remote named origin:
$ git push origin master
Git doesn't like you pushing into a remote repository that is associated with a working tree (because this could cause unexpected changes for the person who checked out that working tree). You will generally want to create "bare" repositories for remote access (using git init --bare).
If you attempt to push to a repository that is newer than your working copy you will see an error similar to the following:
$ git push To dottiness.seas.harvard.edu:repos/myproject ! [rejected] master -> master (non-fast forward) error: failed to push some refs to 'dottiness.seas.harvard.edu:repos/myproject' To fix this, run git pull and deal with any conflicts.
To fix this, you need to pull from that repo, merge changes, and then push.
Conflicts
A conflict occurrs when two people make overlapping changes.
Detected when you attempt to update your working copy via git pull.
You may discard your changes, discard the repository changes, or attempt to correct things manually.
If you attempt to pull in changes that conflict with your working tree, you will see an error similar to the following:
$ git pull
remote: Counting objects: 5, done.
remote: Compressing objects: 100% (3/3), done.
remote: Total 3 (delta 2), reused 0 (delta 0)
Unpacking objects: 100% (3/3), done.
From /Users/lars/projects/version-control-workshop/work/repo2
4245cb6..84f1112 master -> origin/master
Auto-merging README
CONFLICT (content): Merge conflict in README
Automatic merge failed; fix conflicts and then commit the result.
To resolve the conflict manually:
Edit the conflicting files as necessary.
To discard your changes (and accept the remote repository version):
- run ``git checkout --theirs README``
To override the repository with your changes:
run git checkout --ours README
When you complete the above tasks:
add the files with git add
commit the changes with git commit.
git: Viewing history
The git log command shows you the history of your repository:
git log PATH
documentation
git log with no arguments shows you the commit messages for each revision in your repository:
$ git log
commit 7c8c3e71893d7481fdd9c13ec8f53cb9c61fac50
Author: Lars Kellogg-Stedman <lars@seas.harvard.edu>
Date: Thu Mar 18 12:46:46 2010 -0400
changed GNU to Microsoft
commit 257f2f3ff44c2165c1182d3673a825fcadf121aa
Author: Lars Kellogg-Stedman <lars@seas.harvard.edu>
Date: Thu Mar 18 12:46:46 2010 -0400
made a change
commit 99c4fb8f37e48284d79c7396aaf755b514d6a249
Author: Lars Kellogg-Stedman <lars@seas.harvard.edu>
Date: Thu Mar 18 12:46:45 2010 -0400
made some changes
commit 20cc63576f7c88541f5b9471e20f4d1c5f8afcb9
Author: Lars Kellogg-Stedman <lars@seas.harvard.edu>
Date: Thu Mar 18 12:46:45 2010 -0400
initial import
git: Tagging and branching
Git has explicit support for tagging and branching.
git tag manipulates tags
git branch and git checkout manipulate branches
git: Tags
Create a tag:
git tag -a TAGNAME
Creates a lightweight tag (an alias for a commit object)
Add -a to create an annotated tag (i.e., with an associated message)
Also possible to create cryptographically signed tags
documentation
git: Tags
List tags:
git tag
Information about a specific tag:
git tag -v TAGNAME
git: Branches
List branches:
git branch
Create a branch rooted at START:
git branch BRANCHNAME START
documentation
If you omit START, the branch is rooted at your current HEAD.
git: Branches
Switch to a branch:
git checkout BRANCHNAME
Create a branch rooted at START and switch to it:
git checkout -b BRANCHNAME START
For example, you want to enhance your code with some awesome experimental code. You create a new seas-workshop-dev branch and switch to it:
$ git checkout -b seas-workshop-dev
You make some changes, and when things are working you commit your branch:
$ git commit -m 'made some awesome changes' -a
And then merge it into the master branch:
$ git checkout master
$ git merge seas-workshop-dev
Updating 1288ed3..33e4a4c
Fast-forward
version-control.rst | 2 ++
1 files changed, 2 insertions
, 0 deletions
git: the index
Git is not really just like Subversion (or most other version control solutions).
The index is a staging area between your working copy and your local repository.
git add adds files to the index
git commit commits files from the index to the repository.
git: the index
git diff is the difference between your working copy and the index.
git diff HEAD is the difference between your working copy and the local repository.
git diff --cached is the difference between the index and the local repository.
git: the index
Refer back to this illustration if you get confused:
(This image used with permission.)
git: Plays well with others
Git can integrate with other version control systems.
Can act as a Subversion client (may be the only Subversion client you ever need).
Can import a CVS repository.
git: Integrating w/ Subversion
You can use git as your Subversion client. This gives you many of the benefits of a DVCS while still interacting with a Subversion repository.
git: Integrating w/ Subversion
Cloning a remote repository:
git svn clone [ -s ] REPO_URL
The -s flag informs git that your Subversion repository uses the recommended repository layout (i.e., that the top level of your repository contains trunk/, tags/, and branches/ directories). The HEAD of your working copy will track the trunk.
This instructs git to clone the entire repository, including the complete revision history. This may take a while for repositories with a long history. You can use the -r option to request a partial history. From the man page:
-r <ARG>, --revision <ARG>
Used with the fetch command.
This allows revision ranges for partial/cauterized history to be
supported. $NUMBER, $NUMBER1:$NUMBER2 (numeric ranges),
$NUMBER:HEAD, and BASE:$NUMBER are all supported.
This can allow you to make partial mirrors when running fetch; but
is generally not recommended because history will be skipped and
lost.
git: Integrating w/ Subversion
Committing your changes back to the Subversion repository:
git svn dcommit
Before you push your changes to the Subversion repository you need to first commit any pending modifications to your local repository. Otherwise, git will complain:
$ git svn dcommit
Cannot dcommit with a dirty index. Commit your changes first, or stash them with `git stash'.
at /usr/libexec/git-core/git-svn line 491
To fix this, commit your changes:
$ git commit -m 'a meaningful commit message' -a
And then send your changes to the Subversion repository:
$ git svn dcommit
Committing to https://source.seas.harvard.edu/svn/version-control-workshop/trunk ...
M seealso.rst
Committed r38
M seealso.rst
r38 = 03254f2c0b3d5e068a87566caef84454558b85b0 (refs/remotes/trunk)
No changes between current HEAD and refs/remotes/trunk
Resetting to the latest refs/remotes/trunk
Unstaged changes after reset:
M git.rst
M git.rst
Committed r39
M git.rst
r39 = d1f884a3f945f6083541e28ab7a09ca8efc6343b (refs/remotes/trunk)
No changes between current HEAD and refs/remotes/trunk
Resetting to the latest refs/remotes/trunk
git: Integrating w/ Subversion
Updating your working copy from the Subversion repository:
git svn rebase
As with git svn dcommit, you must have a clean working copy before running the rebase command.
git: Integrating w/ CVS
You can import a CVS repository into git (this is a one-time, one-way operation).
The CVS import feature requires cvsps, a tool for collating CVS changes into changesets.
git: Integrating w/ CVS
This may take a while:
export CVSHOME=:pserver:anonymous@example.com
cvs login
git cvsimport -o cvs_head -C my-project
git: Frontends
The git wiki has a list of frontends for git.