On This Page:
Projector Setup
Open up Scan Software DAVID. If you wish to update your software to the latest version, go to www.david-3d.com to download the most updated version. Start DAVID by running “Start_DAVID3_x64” from the USB flash drive. If you use 32-bit system (not recommended), run “Start_DAVID3”.
- Select "DAVID SLS-2" as your setup type.
- Set up the Screen ID so that the stripe pattern is shown on your projector. (usually 2)
- Choose the camera you are using for the 3D Scan.
Step 1 Connect the projector and camera to a computer