TT060 Martin PID ADC

Owned by Jim MacArthur
Jun 09, 2022
1 min read

Missing pics and docs – this is a place holder.


Each sensor is mounted in a holder with provides a regulated 3.3V and passive filters for the output voltage.  Here's a PDF of the schematic:



The output voltages of three sensors go to a custom data acquisition system based on a TipTop1590BB.  Refer to docs in the TipTone "Boards" subdirectory.

No markup schematics or pics available.

The TipTone1590B is essentially an Arduino-Compatible MKRZero processor with isolated USB.

The data acquisition is done with a slightly modified Topper originally designed for magnetometry, called ToprMagADC.  Here are marked-up schematics.



The 10V supply is vestigial.


Here is the Arduino code:







Copyright © 2024 The President and Fellows of Harvard College * Accessibility * Support * Request Access * Terms of Use