Chile reassembly notes

Starting to think about what we will need to take apart, and what can stay put together.

~~FMP2 mounts with BB2-E02 mirrors in them are extremely difficult to get on to the tip-tilt stages. Note which equipment needed for that.~~
During assembly, I should write down which serial numbers of piezos/channels correspond to which serial numbers on the k-cubes.
test collimation when assembling
mounting just to the right of the slit

Assembly/Alignment Procedure

Packing List

Laser diode
Modified AD10F
BE05-532
Adapter between beam expanders (SM2A30 and SM1 short)?
BE20-532
SM2RC
(2) KM100 mounts
BSW27 plate beamsplitter
(2) MFF102 flip mount
- power supply
- USB
ND Filter Kit
PFE10-G01 elliptical mirror
H45E1 45 degree mount
CM750-500-G01 large concave mirror, f=500mm
LMR75
LP126MU camera
(5?) BS031 beamsplitter cubes
(5?) Sets of machined beamsplitter cube holders
- Special screws that go with these
- Nuts to go on the ends of the screws
- Screws that secure the machined parts to the stages
(5?) APY002 stages
(8?) PIA13 piezo actuators
- Small wrench(es)
(2) KIM100 piezo controllers
- power supplies
- USB controllers
LabJack T7 Pro
- USB to computer
Geekom iT13 Pro
- power supply
- USB hubs
- ethernet cable
(3) BB2-E02 mirrors
Manual translation stage
- mounting adapter for stage
- screws for mounting adapter
- mounting adapter for optical bench
- extra ball bearings
Ethernet switch
- Mac ethernet adapter (for testing connectivity issues)
Zip ties
Power strip
- Power adapters
Turnbuckles
- Turnbuckle hooks
- Turnbuckle metal cords
Hooks
AP90R right angle bracket
Wedges